Oil filter manufacturer: universal use of oil filter machine?

Mechanical equipment for filtering solid impurities and moisture in oil and improving oil quality.

A filter unit for removing impurities and moisture in impure oil by pressure filtration or vacuum evaporation pressure filtration is adopted. The oil filter is mainly used to improve the insulation performance and the purity of the lubricating oil.

The oil filter is divided into structure form: plate frame type oil filter, high precision oil filter, vacuum oil filter machine, regenerating filter oil machine, centrifugal oil filter machine. The function medium is divided into oil filter oil filter, transformer oil filter oil filter and oil resistant oil filter machine.

The ordinary oil filter is composed of a primary filter, an oil pump and a filtration device. The primary filter is a tube shaped metal mesh, which prevents the larger solid particles in the impure oil from entering the oil pump. Oil pumps are usually used as gear pumps to transport pure oil into the filter. The filter device is a small manual compression plate and frame filter press, and uses special filter paper as filter medium. The impure oil enters the plate and frame filter press under the pressure of the oil pump and filters the oil through the filter paper. The solid impurities in the oil are trapped on the surface of the filter paper, and a small amount of water is absorbed by the pores of the filter paper. The filter pressure is usually not more than 0.3 MPa. When the filter paper is deposited on the surface of the filter, the filter pressure rises to 0.35 MPa, or when the moisture absorption of the filter paper is close to saturation and the residual moisture in the filter oil is no longer reduced, the filter paper should be replaced. When the viscosity of the oil is high, it can be preheated to reduce viscosity and then filter. This filter can only remove solid impurities and a small amount of moisture, which is suitable for the purification of general electric appliances and lubricants. When the oil contains too much moisture and impurities, it must be pretreated and sent to the oil filter. The processing quantity of the ordinary oil filter is 25~200 liters / points. The square filter frame of the filter device has 200 millimeters, 250 millimeters, two kinds of inner side length. The filter plate and filter frame are made of cast iron or polypropylene.

What kind of oil filter do you have?

According to the principle of the oil filter, it can be divided into:

1. Plate frame oil filter

Two. Vacuum oil filter

Three, coalescing oil filter

Four. Centrifuge separator oil filter

Five, electrostatic adsorption oil filter, and so on.

Six, integrated purification equipment.

Seven. Stainless steel filter

Eight. Automatic slagging and oil filter machine and bag filter oil filter